WESM zl Management and Configuration Guide WT.01.03 and greater

2-11
Configuring the ProCurve Wireless Edge Services zl Module
Management Interfaces
Logging In to the Web Browser Interface
Whichever way you attempt to access the Web browser interface, you are
prompted to enter a username and password. (See Figure 2-2.)
Figure 2-2. Logging In to the Module’s Web Browser Interface
In the Username field, enter manager, and in the Password field, enter the default
password procurve. (The Wireless Edge Services zl Module also supports the
operator user. For more information, see “Default SNMP v3 Users—Manager
and Operator” on page 2-26.)
Note To protect your network, ProCurve Networking strongly recommends that
you immediately change the password for the manager and operator users.
(See “Changing the Password for the Default SNMP v3 Users (Operator or
Manager)” on page 2-35.)