WESM zl Management and Configuration Guide WT.01.03 and greater

2-60
Configuring the ProCurve Wireless Edge Services zl Module
Radio Port Adoption
Figure 2-32. Radio Port VLAN for an Indirectly Connected RP
Instead of using the default Radio Port VLAN, you can use any VLAN in your
network—even a VLAN that is used to transmit wired traffic. In this case, you
must manually tag the downlink port for this VLAN and configure other switch
ports for this VLAN as described above. In Figure 2-33, for example, the
network administrator used VLAN 300 for traffic transmitted to and from one
of the RPs.