WESM zl Management and Configuration Guide WT.01.03 and greater

2-112
Configuring the ProCurve Wireless Edge Services zl Module
SNMP Traps and Error Reporting
To view SNMP statistics, select Management > SNMP Access and click the
Statistics tab.
Figure 2-69. Management > SNMP Access > Statistics Screen
SNMP Traps
To generate alarm logs, you must enable the Wireless Edge Services zl Module
to generate SNMP traps, and you must enable specific SNMP traps. For
example, you may want the module to generate an alarm if file system space
becomes low or if a user fails to authenticate.
After you enable the SNMP trap function and the specific traps you want, the
Wireless Edge Services zl Module will begin to log events that match the SNMP
traps you have enabled. In addition to viewing these logs through the Web
browser interface, you can configure the Wireless Edge Services zl Module to
send the SNMP trap information to your SNMP server. (For information about
viewing logs through the Web browser interface, see “Configuring Logging”
on page 12-64 in Chapter 12: “Wireless Network Management.”)