WESM zl Management and Configuration Guide WT.01.03 and greater

2-114
Configuring the ProCurve Wireless Edge Services zl Module
SNMP Traps and Error Reporting
The SNMP traps for the Wireless Edge Services zl Module are divided into
the following categories:
• Redundancy
• Miscellaneous
•NSM
• Mobility
• DHCP
•Radius
•SNMP
• Wireless
2. Check the Allow Traps to be generated box.
3. To view the SNMP traps in a category, click the Plus ( + ) sign next to the
category. To view the SNMP traps in all categories, click the Expand all
items button.
4. To enable all the traps, select All Traps and click the Enable all sub-items
button.
5. To enable all the SNMP traps in a category, select the category and click
the Enable all sub-items button.
6. To enable a specific SNMP trap, select the trap and click the Enable button
or double-click the trap. A green check mark is displayed next to enabled
traps. A red x is displayed next to disabled traps.