WESM zl Management and Configuration Guide WT.01.03 and greater

2-116
Configuring the ProCurve Wireless Edge Services zl Module
SNMP Traps and Error Reporting
4. Click the Apply button to save the change to the running-config.
5. Click the Save link at the top of the Web browser interface to save the
changes to the startup-config.
Setting Thresholds
You can set the thresholds that determine when SNMP traps are generated.
Select Management > SNMP Trap Configuration and click the Wireless Statistics
Thresholds tab.
Figure 2-72. Management > SNMP Trap Configuration > Wireless Statistics
Thresholds Screen
Table 2-7 shows which thresholds you can set for stations, radios, and WLANs,
and for the Wireless Edge Services zl Module itself.