WESM zl Management and Configuration Guide WT.01.03 and greater

2-122
Configuring the ProCurve Wireless Edge Services zl Module
Radio Port Licenses
Edit an SNMP Trap Receiver. If you define an SNMP trap receiver and
later need to change its IP address, complete these steps:
1. Select Management > SNMP Trap Receivers.
2. Click the Edit button.
3. You can change these settings:
• IP address
• port
To change the SNMP version, you must delete the receiver from the
Management > SNMP Trap Receivers screen and re-add it with the correct
version.
4. Click the OK button.
5. Click the Save link at the top of the Web browser interface to save the
changes to the startup-config.
Radio Port Licenses
Each Wireless Edge Services zl Module (J9051A) ships with 12 nonremovable
RP licenses. When you install the Wireless Edge Services zl Module into a
switch, the module can automatically adopt up to 12 RPs. If you move the
Wireless Edge Services zl Module to another switch, these 12 RP licenses
move with the module. They cannot be uninstalled or transferred to another
Wireless Edge Services zl Module.
If you want to manage more than 12 RPs through a Wireless Edge Services zl
Module, you can purchase and install additive licenses. You can purchase two
types of additive licenses:
■ a license which allows the Wireless Edge Services zl Module to adopt 12
additional RPs
■ a license which allows the Wireless Edge Services zl Module to adopt 48
additional RPs
You can install multiple licenses; the Wireless Edge Services zl Module can
adopt a maximum of 156 RPs. Because each RP has a maximum of two radios,
each Wireless Edge Services zl Module can manage up to 312 radios. Typically,
you would add 12 RP Licenses when your module must support fewer than 60
RPs. If the module must support more than 60 RPs, install up to three 48 RP
Licenses. (See Table 2-8.)