WESM zl Management and Configuration Guide WT.01.03 and greater

2-128
Configuring the ProCurve Wireless Edge Services zl Module
Radio Port Licenses
If you have not yet registered with the My ProCurve Web portal, visit
http://my.procurve.com and follow the registration instructions.
Understanding the Numbers: IDs and Keys
Installing and uninstalling the Wireless Services Module 12 RP License or the
Wireless Services Module 48 RP License involves several different numbers:
■ Registration ID—The Wireless Services Module RP Licenses include a
registration ID. You do not input this number to install the license. Instead,
you enter this number on the My ProCurve Web portal, which then
generates the license key that you enter to install the license.
■ Hardware ID—This number identifies the Wireless Edge Services zl
Module. It includes the module’s serial number and an identifier for the
additional license.
■ License key—The My ProCurve Web portal generates the license key,
after you enter both the registration ID and the hardware ID. You must
enter this number to enable the RPs that you are licensing.
■ Uninstall verification key—This number is generated if you uninstall a
radio-port license from a ProCurve device. If you want to install the
Wireless Services Module RP License on another module, you use the
uninstall verification key to generate a new registration ID on the My
ProCurve portal.
Installing RP Licenses
If you decide to use the manual method to install the RP license, you must be
able to access the My ProCurve Web portal and the Web browser interface for
the Wireless Edge Services zl Module. For convenience, you should open two
browsers so that you can move easily between the portal and the Web browser
interface.
After you open two Web browsers, complete these steps:
1. Locate the registration ID for the Wireless Services Module 12 RP License
or the Wireless Services Module 48 RP License. Place it within easy reach.
2. Access the My ProCurve Web portal at http://my.procurve.com and
sign in.
3. On the main My ProCurve page, click My Software. (See Figure 2-80.)