WESM zl Management and Configuration Guide WT.01.03 and greater

2-132
Configuring the ProCurve Wireless Edge Services zl Module
Radio Port Licenses
d. In the Step 1—Generate Hardware ID section, click the Gen-Hw-ID
button.
e. When a number is displayed in the System Generated Hardware Id field,
copy it
(using Ctrl-C) or write it down. (Copying the number is easier
and more accurate.)
You must enter this number on the My ProCurve
Web portal.
7. Return to the My ProCurve Web portal. In the Enter Hardware ID# field,
paste (using Ctrl-V) or enter the hardware ID.
8. Enter notes in the Customer Notes field. This field is optional. For example,
you might want to enter a short description that explains where this
Wireless Edge Services zl Module is located. These notes are stored, along
with the registration ID number, in your account on the My ProCurve Web
portal.
9. Click the Next button. The License Agreement page is displayed.
10. Read the license terms. If you agree to these terms, check the I agree to
the license terms box.
11. Click the Generate License button. The My ProCurve Web portal generates
a license key and displays it on the License Key Confirmation page. In
addition, the portal emails you the license key.
12. Copy the license key (Ctrl-C) from the screen or write it down.
13. Return to the Install License (Step 1 and Step 2) screen in the Web browser
interface for the Wireless Edge Services zl Module.
14. In the Step 2—Install License Key section, enter the license key and click
the Lic-Install button. A message confirms a successful installation or
identifies a problem that prevented the license from installing.
15. If you have successfully installed the license, click the Close button. The
new license is now listed on the Management > Licenses screen.
Removing RP Licenses
If you want to transfer the Wireless Services Module 12 RP License or 48 RP
License from one Wireless Edge Services zl Module to another, you must first
access the Web interface browser and uninstall the license. During this
process, the module generates an uninstall verification key. You must copy or
record this key so that you can enter it on the My ProCurve Web portal. The
Web portal, in turn, uses this key to generate a new verification key, which
you can use to install the license on the new Wireless Edge Services zl Module.