WESM zl Management and Configuration Guide WT.01.03 and greater

2-177
Configuring the ProCurve Wireless Edge Services zl Module
Digital Certificates
4. In the Select a trustpoint for the new certificate section, select one of the
following:
• Use existing trustpoint—You can select a trustpoint that you have
created previously from the drop-down menu. (This option is avail-
able only when an existing trustpoint does not have a current certifi-
cate.)
• Create a new trustpoint—Enter the trustpoint name in the field.
5. You must include a public key in the certificate request. In the Specify a
key for your new certificate section, select one of the following:
• Automatically generate a key—Generate a key specifically for this
certificate.
• Use existing key—Use a key pair that you created previously; Select
the key from the drop-down menu.
• Create a new key—Create a new key pair for this certificate that you
can also use for future certificates.
–In the Key Label field, enter a name for the key.
–In the Key Size field, enter the key size, from 1,024 through 2,048
bytes.
Note You can also create keys in a separate procedure; see “Creating a Key” on
page 2-191 for information.
6. Click the Next button. The screen shown in Figure 2-106 is displayed.