WESM zl Management and Configuration Guide WT.01.03 and greater

2-181
Configuring the ProCurve Wireless Edge Services zl Module
Digital Certificates
iii. Choose FTP or TFTP from the Using drop-down menu, and, if
necessary choose the port for your server. (The default port is
usually correct.)
iv. Specify the server’s IP address.
v. For FTP, enter the username and password.
vi. Leave the Path field blank to save to the server’s base directory.
Or enter a valid directory path on the server.
To save the certificate request to the workstation running the Web
browser, follow these steps:
i. In the To drop-down menu, select Local Disk.
ii. Choose a name for the request and enter it in the File field with a
valid path. For example: C:/myrequest. Alternatively, click the
browse button and browse for the directory in which to save the
request.
11. Click the Next button. A completion screen summarizes the certificate
request operation that you have performed.
12. Click the Finish button.
Uploading a Certificate to the Module
After a CA issues your company a certificate, you must upload the certificate
to the Wireless Edge Services zl Module. You can upload the certificate from
an FTP server, TFTP server, or your local workstation. The certificate should
be in Privacy Enhanced Mail (PEM) or Distinguished Encoding Rules (DER)
format.
To upload a certificate using the Certificates Wizard, complete these steps:
1. On the Certificates Wizard Welcome screen, in the Select a certificate
operation section, select Upload an external certificate.