WESM zl Management and Configuration Guide WT.01.03 and greater

2-191
Configuring the ProCurve Wireless Edge Services zl Module
Digital Certificates
12. Click the Transfer button. In the Status section at the bottom of the screen,
a message is displayed, reporting whether the transfer was successful.
13. After the trustpoint transfer is complete, click the Close button.
Certificate Keys
A certificate relies on a public/private key pair. You can use the same key pair
for multiple certificates, or you can use a different pair for each certificate.
When you configure certificate requests and self-signed certificates, you can
automatically create a public/private key pair for the certificate. You can also
create a named key pair for that certificate and use the key pair for future
certificates. You manage named key pairs from the The Management > Certif-
icate Management > Keys screen. From this screen you can:
■ create new keys or delete existing keys
■ transfer keys to a secure location for archiving
■ upload keys from an external server
Creating a Key
This section explains how to use the Management > Certificate Management >
Keys screen to create keys.
Note You can also create keys within the Certificates Wizard when you create
certificate requests and self-signed certificates; see “Creating Certificates” on
page 2-171 for more information.
To create a key, complete these steps:
1. Select Management > Certificate Management and click the Keys tab.