WESM zl Management and Configuration Guide WT.01.03 and greater

2-194
Configuring the ProCurve Wireless Edge Services zl Module
Digital Certificates
Figure 2-116.Transfer Keys from Wireless Edge Services zl Module
4. Use the next drop-down menu to select the key to be transferred.
5. In the Pass phrase field, enter a passphrase, which can include spaces and
special characters.
The passphrase encrypts the key pair, and, although optional, is recom-
mended for security. In order to decrypt and use the key, a person must
know the correct passphrase.
6. In the Target section, from the To drop-down menu, select the destination
for the key transfer, either Server or Local Disk.
7. In the File field, enter the filename of the target key file. The default
filename is the name of the key being transferred.
8. If you specified a server target in step 6, specify the following for the key
transfer target:
a. In the Using drop-down menu, select the protocol for the key transfer,
either FTP or TFTP.
b. In the Port field, enter the respective FTP or TFTP port number; the
default port number (port 21 for FTP, port 69 for TFTP) should apply
in most cases.
c. In the IP Address field, enter the IP address of the FTP or TFTP server.