WESM zl Management and Configuration Guide WT.01.03 and greater

3-9
Radio Port Configuration
Configuring Radio Settings
As described above, you establish settings for a radio adoption default config-
uration from a radio type’s default Configuration screen. To access this screen,
complete these steps:
1. Select Network Setup > Radio Adoption Defaults and click the
Configuration tab.
This screen includes two rows, one for 802.11a and one for 802.11bg. Each
row displays basic settings currently configured for that type of radio:
• placement
• channel
• power in dBm and power in mW
Figure 3-4. Accessing the Radio Adoption Default Configurations
2. Select the radio type for which you want to alter the configuration.
3. Click the Edit button. The Configuration screen for that radio type is
displayed. (See Figure 3-5.)