WESM zl Management and Configuration Guide WT.01.03 and greater

3-31
Radio Port Configuration
Configuring Radio Settings
Configuring Radio Settings for a Particular Radio
The Radio Settings section on a particular radio’s Configuration screen includes
the same options as the corresponding section in a radio type’s default
Configuration screen.
However, the section also includes an Actual column to the right of the
settings that displays the channel and power level that the radio is actually
using. You can view this column to verify that the radio is using appropriate
settings and to determine whether you must make any configuration changes
or corrections.
The Actual column also helps you to monitor your wireless network. For
example, even if a radio uses ACS to select its channel, you may want to know
which channel the radio has selected.
Figure 3-12. Radio Configuration Radio Settings
To change the radio settings, complete these steps:
1. Select Network Setup > Radio and click the Configuration tab.
2. Select the radio that you want to configure and click the Edit button.
Actual Column
Placement
Channel Selection
Power Options