WESM zl Management and Configuration Guide WT.01.03 and greater

4-23
Wireless Local Area Networks (WLANs)
Configuration Options: Normal Versus Advanced Mode
3. On the Network Setup > WLAN Setup screen, select the WLANs, and then
click Enable.
4. Click the Global Settings button. The Global WLAN Settings screen is dis-
played.
5. Check the Advanced Configuration box, and then click the OK button.
6. If necessary, tailor the radio adoption default configurations:
a. Select Network Setup > Radio Adoption Defaults and click the WLAN
Assignment tab.
b. Edit the WLAN assignment, as described in “Manually Assigning
WLANs to the Radio Adoption Default Configuration” on page 4-15.
For example, you might select a different WLAN from the Primary
WLAN drop-down menu.
7. If necessary, tailor a specific radio’s configuration:
a. Select Network Setup > Radio and click the WLAN Assignment tab.
b. Select the radio and click the Edit button.
c. Edit the WLAN assignment, as described in “Manually Assigning
WLANs to a Specific Radio” on page 4-18. For example, you can
prevent an RP in a public space from supporting a WLAN by uncheck-
ing the Assign box for that WLAN’s SSID.
Changing from Advanced Mode to Normal Mode
Configuration
Before disabling advanced mode configuration, you must verify that all WLAN
assignments are compatible with normal mode. Check that:
■ WLANs 1, 5, 9, and 13 (if enabled) are assigned to BSSID 1
■ WLANs 2, 6, 10, and 14 (if enabled) are assigned to BSSID 2
■ WLANs 3, 7, 11, and 15 (if enabled) are assigned to BSSID 3
■ WLANs 4, 8, 12, and 16 (if enabled) are assigned to BSSID 4
If necessary, reconfigure the WLAN assignments as described in “Enabling
WLANs Using Advanced Mode Configuration” on page 4-13. You must also
remove all WLANs with indexes 17 and higher from the BSSIDs.
Note WLANs 17 through 256 are not available in normal mode. If you want the
Wireless Edge Services zl Module to continue supporting one of these WLANs,
then you must configure the corresponding SSID and settings on a WLAN with
an index number from 1 through 16.