WESM zl Management and Configuration Guide WT.01.03 and greater

5-32
Web Authentication for Mobile Users
Configuring Web-Auth
4. If you have selected a WPA encryption type, click its Config button and
specify the preshared key.
See “Configuring WPA/WPA2-PSK” on page 4-58 of Chapter 4: “Wireless
Local Area Networks (WLANs)” for more information on configuring the
preshared key.
5. Click the OK button to close the WLAN Edit screen and save your config-
uration changes to the running-config. You are returned to the Network
Setup > WLAN Setup > Configuration screen.
Figure 5-22. Network Setup > WLAN Setup > Configuration Screen
6. Activate the WLAN that you have configured by selecting the WLAN and
clicking the Enable button.
7. Click the Save link at the top of the Web browser interface to save the
changes to the startup-config.