WESM zl Management and Configuration Guide WT.01.03 and greater

7-13
Access Control Lists (ACLs)
Configuring ACLs
5. Click the OK button. The ACL is now listed in the ACLs section of the
Security > ACLs > Configuration screen.
Figure 7-3. Security > ACLs > Configuration with ACL
Configuring Rules for ACLs
After you create an ACL, you must add rules to it. These rules actually select
and control the traffic.
For each ACL rule, you must specify the following:
■ the rule’s precedence
■ the operation (deny, permit, or mark) that the Wireless Edge Services zl
Module performs on selected packets
■ the filters that select a packet or frame according to fields in the header
You can configure up to 500 rules for each ACL, no matter what its type.