WESM zl Management and Configuration Guide WT.01.03 and greater

11-13
RADIUS Server
RADIUS Authentication
2. Click the Add button. The ADD screen is displayed.
Figure 11-5. Adding a RADIUS Server Group
3. In the Name field, enter a meaningful name—for example, “Faculty.”
4. In the VLAN ID field, enter the dynamic VLAN for users in this group.
If you enter 0, the Wireless Edge Services zl Module assigns the user to
the VLAN configured for the user’s WLAN.
You should not use dynamic VLANs with Web-Auth. The user’s station
receives an IP address in the static VLAN before the user can log in and
receive the dynamic VLAN assignment.
Note You must enable dynamic VLANs in the WLAN to which users connect for this
setting to take effect. See “Enabling Authentication to the Internal Server on
a WLAN” on page 11-33.