WESM zl Management and Configuration Guide WT.01.03 and greater

12-99
Wireless Network Management
Network Self Healing
The Wireless Edge Services zl Module subtracts the offset from the maximum
power allowed in your regulatory domain to define the maximum power for
that radio. To configure this parameter, complete these steps:
1. Select Network Setup > Radio > Configuration.
2. Select the radio and click the Edit button. The Configuration screen for the
selected radio is displayed. (See Figure 12-70.)
Figure 12-70.Configuring the Self Healing Offset Option
3. In the Advanced Properties section, enter a value in the Self Healing Offset
field.
Base the offset on the radio’s antenna gain and the rules of your regulatory
domain as explained in http://www.hp.com/rnd/support/manuals/
rports.htm.
4. Click the OK button.
Self Healing
Offset