WESM zl Management and Configuration Guide WT.01.03 and greater

A-50
ProCurve Wireless Services zl Module Command Line Reference
Manager Commands
Command Mode
Manager
Example
This example displays an incomplete route telnet message.
terminal
This command sets terminal line parameters.
Syntax
terminal length | width
• length - Set number of lines on a screen.
– <2-1000> - Number of lines on a screen.
• width - Set width of display terminal.
– <61-1920> - Number of characters on a screen line.
Default Setting
N/A
Command Mode
Manager
Example
upgrade
This command upgrades the software image.
Syntax
upgrade URL
• URL - Location of firmware image.
HPswitch#telnet 10.1.0.9 23
telnet: Unable to connect to remote host (10.1.0.9): No
route to host
HPswitch#
HPswitch#terminal length 1000
HPswitch#
HPswitch#terminal width 1900
HPswitch#