WESM zl Management and Configuration Guide WT.01.03 and greater

A-56
ProCurve Wireless Services zl Module Command Line Reference
GlobalCommands
access-list
This command adds an access control list (ACL) entry.
Syntax
access-list
(See switch reference.)
Default Setting
N/A
Command Mode
Global
Example
boot
This command reboots the wireless module.
Syntax
boot flash (primary | secondary )
• flash - Specifies the boot image to use after reboot.
– primary - Primary image.
– secondary - Secondary image.
Default Setting
N/A
Command Mode
Global Configuration
Example
HPswitch#access-list
HPswitch
HPswitch#configure
HPswitch(config#boot flash primary
Wireless module will be rebooted, do you want to continue?
(y/n): y
Do you want to save current configuration? (y/n):n
ProCurve(config)#