WESM zl Management and Configuration Guide WT.01.03 and greater

A-73
ProCurve Wireless Services zl Module Command Line Reference
GlobalCommands
• monitor Set terminal lines logging level
– <07> Logging severity level
– alerts Immediate action needed (severity=1)
– critical Critical conditions (severity=2)
– debugging Debugging messages (severity=7)
– emergencies System is unusable (severity=0)
– errors Error conditions (severity=3)
– informational Informational messages (severity=6)
– notifications Normal but significant conditions (severity=5)
– warnings Warning conditions (severity=4)
• on Enable logging of system messages
• syslog Set syslog servers logging level
– <07> Logging severity level
– alerts Immediate action needed (severity=1)
– critical Critical conditions (severity=2)
– debugging Debugging messages (severity=7)
– emergencies System is unusable (severity=0)
– errors Error conditions (severity=3)
– informational Informational messages (severity=6)
– notifications Normal but significant conditions (severity=5)
– warnings Warning conditions (severity=4)
Default Setting
N/A
Command Mode
Global
Example
logout
This command exits user from the CLI.
Syntax
logout
Default Setting
N/A
HPswitch#logging aggregationtime <160>
HPswitch