WESM zl Management and Configuration Guide WT.01.03 and greater

A-82

ProCurve Wireless Services zl Module Command Line Reference

GlobalCommands

Default Setting

N/A

Command Mode

Global

Example

redundancy

This command enables user to configure redundancy group parameters. The

no negates the configuration.

Syntax

| interfaceip | manualrevert | memberip | mode)

• discoveryperiod Set the redundancy discovery interval.

– <1060> discovery time in secs (default is 30)

• enable Enable redundancy protocol.

• groupid Set the redundancy group id

– <165535> Redundancy group Id

• handlestp Delay the redundancy protocol state machine exec, con-

sidering STP

– enable Set handlestp to true

• heartbeatperiod Set the redundancy heartbeat interval.

– <1255> heartbeat interval in secs (default is 5)

• holdperiod Set the redundancy hold interval.

– <10255> hold interval in secs (default is 15)

• interfaceip Set redundancy interface IP address

– A.B.C.D IP address of the wireless module

• manualrevert Revert standby to nonactive mode

• memberip Add member to this redundancy group

– A.B.C.D IP address of the member

• mode set the redundancy mode

– active mode can be active

– standby mode can be standby

HPswitch#radius-server host A.B.C.D authport <065536> key 0

LINE

HPswitch