WESM zl Management and Configuration Guide WT.01.03 and greater

A-83
ProCurve Wireless Services zl Module Command Line Reference
GlobalCommands
Default Setting
N/A
Command Mode
Global
Example
Related Commands
show redundancy (page A-148)
service
This command enables user to control the use of network services.
Syntax
service (dhcp | ftp | no | radius)
• dhcp Enable the DHCP Server service
• ftp Configure FTP Server
– enable Enable FTP Server
– password Configure FTP password
+ 0 Password is specified UNENCRYPTED
- LINE Password
+ 1 Password is encrypted with SHA1 algorithm
- LINE Password
++ LINE Password
– rootdir Configure FTP root dir
+ DIR Root dir of the FTP server
• no Negate a command or set its defaults
HPswitch#configure
HPswitch(config)#redundancy interfaceip 10.10.1.20
HPswitch(config)#redundancy memberip 10.10.1.21
HPswitch(config)#redundancy mode active
HPswitch(config)#redundancy holdperiod 20
HPswitch(config)#redundancy groupid 50
HPswitch(config)#redundancy handlestp enable
HPswitch(config)#redundancy discoveryperiod 10
HPswitch(config)#redundancy holdperiod 10
HPswitch(config)#