WESM zl Management and Configuration Guide WT.01.03 and greater

– ftp Configure FTP Server
+ enable Disable FTP Server
• radius Enable radius server
– restart Restart the radius server with updated configuration
Default Setting
N/A
Command Mode
Global
Example
sflow
This command configures or unclaims an sflow sampling receiver.
Syntax
sflow (<13>)
• <13> Select one of three possible sFlow receiver tables
– destination IP address of sFlow collector/management station
+ A.B.C.D IP address (e.g. 10.0.0.1)
-- 80211toethernet Sampled interfaces will emulate
Ethernet interfaces for sFlow collectors and management
applications that don't support the sFlow 802.11 extension
-- <165535> UDP application port of sFlow collector/manage-
ment station
+++ 80211toethernet Sampled interfaces will emulate
Ethernet interfaces for sFlow collectors and management
applications that don't support the sFlow 802.11 extension
– polling Specify the radios for which packets are to be polled
+ <11000> A single radio index
-- 0 Disable polling
-- <2065535> Specify the maximum interval (seconds)
between polling of counters
+ RADIO A list (eg: 1,3,7) or range (eg: 37) of radio indices
-- 0 Disable polling
HPswitch#service dhcp
HPswitch