WESM zl Management and Configuration Guide WT.01.03 and greater

A-91
ProCurve Wireless Services zl Module Command Line Reference
GlobalCommands
– detail Last image upgrade log
• users Display information about terminal lines
• version Display software & hardware version
– verbose Display software & hardware details
• vlans VLAN Information
• wireless Wireless configuration commands
– ap-detection-config DetectedAP Configuration Parameters
– approve-daps Approved APs seen by radioport scans
– channel-power List of available channel and power levels for
a radio
+ 11a radio is of type 802.11a
- indoor radio is placed indoor
- outdoor radio is placed outdoor
+ 11bg radio is of type 802.11bg
- indoor radio is placed indoor
- outdoor radio is placed outdoor
– config Wireless Configuration Parameters
– ids Intrusion detection parameters
+ filterlist Display the list of currently filtered stations
– macauthlocal list out the macauthlocal entries
+ <11000> macauthlocal entry to display
– multicast-packet-limit multicastpacketlimit
– phrase-to-key display the WEP keys generated by a passphrase
+ wep128 display WEP128 keys
- LINE the passphrase (between 4 and 32 characters)
+ wep64 display WEP64 keys
- LINE the passphrase (between 4 and 32 characters)
– qos-mapping Quality of Service mappings used for mapping
WMM access categories and 802.1p / DSCP tags
+ wired-to-wireless Mappings used when traffic is switched
from wired to the wireless side
+ wireless-to-wired Mappings used when traffic is switched
from wireless to the wired side
– radio Radio related commands
+ beacon-table The RadiotoRadio beacon table
+ config Radio configuration
- <11000> A single radio index
- default11a default 11a configuration template