WESM zl Management and Configuration Guide WT.01.03 and greater

A-99
ProCurve Wireless Services zl Module Command Line Reference
GlobalCommands
+++PASSWD - Authentication password for user.
– operator - Operator user.
+v3 - User using v3 security model.
- auth - Authentication parameters for the user.
++md5 - Use HMAC MD5 algorithm for authentication.
- -PASSWD - Authentication password for user.
- encrypted - Specifying password as md5 digests.
++auth - Authentication parameters for the user.
- -md5 - Use HMAC MD5 algorithm for authentication.
+++PASSWD - Authentication password for user.
Default Setting
SNMP v2: enabled
SNMP v2 community: private rw,public ro,trap ro
SNMP v3: enabled
Command Mode
Global Configuration
Example
Related Commands
show snmp (page A-154)
spanning-tree
This command enable spanning tree commands.
Syntax
spanning-tree (mst)
• mst - Multiple spanning tree.
– configuration Configuration
Default Setting
Disabled
HPswitch# configure
HPswitch(config)#snmp-server community private restricted
HPswitch(config)#snmp-server contact Paul
HPswitch(config)#snmp-server location 2F R19