WESM zl Management and Configuration Guide WT.01.03 and greater

A-101
ProCurve Wireless Services zl Module Command Line Reference
GlobalCommands
Default Setting
N/A
Command Mode
Global Configuration
Example
Related Commands
show timezone (page A-159)
upd-server
This command configures autoinstall update server parameters. The no com-
mand negates this configuration.
Syntax
updserver (cfgfileloc | clustercfgfile | forceCfgDownload | imgfileloc | ip | unreachable)
• cfgfileloc Set config file location
– WORD Config file location
• clustercfgfile Set cluster config file location
– WORD Config file location
• forceCfgDownload Force the config update bypassing the check-
sum validation
• imgfileloc Set Image file location
– WORD Path of the Image file on ftp/tftp server
imgfilever Version of the image file
WORD Version string
• ip server ipaddress
– A.B.C.D ipaddress in A.B.C.D format
+ protocol autoinstall server protocol
- ftp FTP protocol
++ username server username
-- WORD username if applicable
+++ passwd server password
HPswitch#configure
HPswitch(config)#timezone
Africa/ Asia/ Atlantic/ Australia/ Etc/ Europe/
Pacific/ America/
HPswitch(config)#