WESM zl Management and Configuration Guide WT.01.03 and greater

A-102
ProCurve Wireless Services zl Module Command Line Reference
GlobalCommands
--- WORD password if applicable
- tftp TFTP protocol
• unreachable Set update server reachability
Default Setting
N/A
Command Mode
Support
Example
Related Commands
show upd-server (page A-159)
username
This command enables user name authentication.
Syntax
username (WORD)
• WORD Username (username length should be between 1 and 28
characters)
– access Set the user access mode
+ console Only allowed from console
+ web Only allowed from applet (webUI)
– password Specify the password for the user
+ 0 Password is specified UNENCRYPTED
-- LINE User password (plaintext passsword length should be
between 8 and 32 characters)
+ 1 Password is encrypted with SHA1 algorithm
-- LINE User password (plaintext passsword length should be
between 8 and 32 characters)
+ LINE User password (plaintext passsword length should be
between 8 and 32 characters)
– privilege Set user access privilege
+ helpdesk Helpdesk (troubleshooting) access
HPswitch#configure
HPswitch(config)#updserver imgfileloc tftp imgfilever 2
HPswitch(config)#