WESM zl Management and Configuration Guide WT.01.03 and greater

A-105
ProCurve Wireless Services zl Module Command Line Reference
Interface Commands
description (interface)
This command configures a description for the interface. The no command
negates this configuration.
Syntax
description (LINE )
no description
• LINE - Characters describing this interface.
Default Setting
N/A
Command Mode
Interface Configuration
Example
Related Commands
show interfaces (page A-138)
ip (interface)
This command configures ip parameters of the interface. The no command
negates this configuration.
Syntax
ip (address)
no ip address
• address - Configures an internet protocol address of an interface.
– A.B.C.D/M - IP address (e.g. 10.0.0.1/8).
– dhcp - Use DHCP Client to obtain IP address for this interface.
Default Setting
unassigned (DHCP)
HPswitch#configure
HPswitch(config)#interface vlan1
HPswitch(config-if)#description EXAMDES
HPswitch(config-if)#