WESM zl Management and Configuration Guide WT.01.03 and greater

A-108
ProCurve Wireless Services zl Module Command Line Reference
Wireless Commands
adopt-unconf-radio
This command adopts a radio even if its not yet configured. The default
templates are used for configuration. The no command negates this configu-
ration.
Syntax
adopt-unconf-radio (enable)
no adopt-unconf-radio enable
• enable - Enables the adoption of unconfigured radios.
Default Setting
N/A
Command Mode
Wireless Configuration
Example
ids Intrusion detection configuration commands. A-111
logout Detailed in Manager Command Section A-23
[no] mac-auth-local (Negates) Establishes local mac authentication
list.
A-113
[no] proxy-arp (Negates) Responds to ARP requests from the
RON to WLAN on behalf of stations.
A-114
[no] radio (Negates) Radio configuration commands. A-114
[no] self-heal (Negates) Self-healing configuration commands. A-118
show Detailed in Show Command Section A-128
support Detailed in Support Command Section A-185
[no] wlan (Negates) WLAN configuration commands. A-120
[no] wlan-prioritization (Negates) Use wlan priority weights to determine
packet queueing order.
A-127
HPswitch#configure
HPswitch(config)#wireless
HPswitch(config-wireless)#adopt-unconf-radio enable
HPswitch(config-wireless)#
Command Function Page