WESM zl Management and Configuration Guide WT.01.03 and greater

A-111
ProCurve Wireless Services zl Module Command Line Reference
Wireless Commands
Command Mode
Wireless Configuration
Example
Related Commands
show wireless ap-detection-config (page A-164)
dot11-shared-key-auth
This command enables support for 802.11 shared key authentication. The no
command negates the support.
NOTE Shared key authentication has known weaknesses that can compromise your
WEP key. It should only be configured to accommodate wireless stations that
are unable to carry out Open-System authentication.
Syntax
dot11-shared-key-auth (enable)
no dot11-shared-key-auth
• enable- Enables support for shared key authentication.
Default Setting
N/A
Command Mode
Wireless Configuration
HPswitch#configure
HPswitch(config)#wireless
HPswitch(config-wireless)#ap-detection approved add 2 any
any
HPswitch(config-wireless)#ap-detection enable
HPswitch(config-wireless)#ap-detection timeout 65
HPswitch(config-wireless)#ap-detection max-aps 200
HPswitch(config-wireless)#