WESM zl Management and Configuration Guide WT.01.03 and greater

A-114
ProCurve Wireless Services zl Module Command Line Reference
Wireless Commands
proxy-arp
This command responds to ARP requests from the RON to WLAN on behalf
of stations. The no command disables the support for the proxy-arp response.
Syntax
proxy-arp (enable)
no proxy-arp enable
• enable- Enables support for proxy arp.
Default Setting
N/A
Command Mode
Wireless Configuration
Example
radio
This command configures the radio parameters. The no command negates the
radio parameter configuration.
Note To configure many of the radio parameters, you must first configure the
country code. See country code.
Syntax
radio ( <1-1000> | RADIO | add | all-11a | all-11bg | configure-8021X | default-11a | default-
11bg )
no radio
• <1-1000> - A single radio index.
• RADIO - A list (eg: 1,3,7) or range (eg: 3-7) of radio indices.
• all-11a - All 11a radios currently in configuration.
• all-11bg - All 11bg radios currently in configuration.
• default-11a - Default 11a configuration template.
• default-11bg - Default 11bg configuration template.
HPswitch#configure
HPswitch(config)#wireless
HPswitch(config-wireless)#proxy-arp enable
HPswitch(config-wireless)#