WESM zl Management and Configuration Guide WT.01.03 and greater

A-115
ProCurve Wireless Services zl Module Command Line Reference
Wireless Commands
The radio (<1-1000> | RADIO | all-11a | all-llbg | default-11a | default-11bg)
commands share the following parameters:
– adoption-pref-id - A preference identifier for this radio port. The
ra dio po rt i s more like ly to be ad op te d b y a wire le ss mo du le
that is its preferred wireless module.
+<1-65535> - The ID.
– antenna-mode - Antenna diversity mode.
+diversity - Full Diversity (both antennas).
+primary - Primary Antenna only.
+secondary - Secondary Antenna only.
– beacon-interval - Beacon interval in K-uSec.
+<50-200> - Beacon interval in milliSeconds.
– bss - Map wireless LANs to radio BSSIDs.
+<1-4> - The BSS where wireless LANs will be mapped.
- WLAN - A list (eg: 1,3,7) or range (eg: 3-7) of WLAN indices.
When a BSS is also specified, the first WLAN will be used as
the primary WLAN. When the auto option is used, the system
will automatically assign the first four WLANs as primaries
on their respective BSS.
+auto - Automatic assignment of BSS. The user selects wireless
LANs, and the system assigns them to a BSS automatically.
- WLAN - A list (eg: 1,3,7) or range (eg: 3-7) of WLAN indices.
When a BSS is also specified, the first WLAN will be used as
the primary WLAN. When the auto option is used, the system
will automatically assign the first four WLANs as primaries
on their respective BSS.
– channel-power - Location, channel and transmit power level.
+indoor - Indoor location.
+outdoor - Outdoor location.
The indoor and outdoor parameters share these parameters:
-<1-200>- Channel number.
++<4-20 - Power in dBm.
-acs - Auto channel selection (radio will scan for the least
congested channel at startup or reconfiguration).
++<4-20> - Power in dBm.
-random - Random channel selection.
++<4-20 - Power in dBm.
– copy-config-from - Copies the configuration from a previously
configured radio.