WESM zl Management and Configuration Guide WT.01.03 and greater

A-120
ProCurve Wireless Services zl Module Command Line Reference
Wireless Commands
wlan
This command configures the wireless LAN parameters. The no command
negates the WLAN parameter configuration.
Syntax
wlan ( <1-32> | WLAN )
no wlan
• <1-1000> - A single WLAN index.
• WLAN - A list (eg: 1,3,7) or range (eg: 3-7) of WLAN indices.
The radio (<1-1000> | WLAN ) commands share the following parame-
ters:
– authentication-type - The authentication type of this WLAN.
+eap - EAP authentication (802.1X).
+none - None / pre-shared keys.
+web-auth - Web based authentication (Note: encryption-type will
be changed to none).
– closed-system - Hides the SSID in beacons, and doesn’t respond
to probes for broadcast ESS on this WLAN.
– description - The description of this WLAN.
+LINE - A string of up to 20 characters.
– dot11i - Configures IEEE 802.11i (TKIP/AES) parameters.
+key - Configures the key (PMK).
-0 - Password is specified UNENCRYPTED.
++WORD - The 256 bit (64 hex characters) long key.
-2 - Password is encrypted with password-encryption secret.
++WORD - The 256 bit (64 hex characters) long key.
-WORD - The 256 bit (64 hex characters) long key.
+key-rotation - Controls the periodic update of the broadcast keys
of all associated stations.
-enable - Enables key rotation.
+key-rotation-interval - Configures the broadcast key rotation
interval.
-<60-86400> - The key rotation interval in seconds.
+oo-pmk-caching - Enables the opportunistic use of cached pair-
wise master keys (fast roaming with eap/802.1X).
+phrase - Configures the passphrase.
- 0 - Password is specified UNENCRYPTED.
++LINE - A passphrase between 8 and 63 characters long.