WESM zl Management and Configuration Guide WT.01.03 and greater

A-124
ProCurve Wireless Services zl Module Command Line Reference
Wireless Commands
+allow-list - Modify web-auth white list parameters. Users who
have not yet authenticated will be allowed access to these IP
addresses.
-<1-10> - Allow-list Rule index (1-10).
++A.B.C.D - Allow-list IP address.
+radius - Modify web-auth radius server parameters. The param-
eter extensions are the same as previous listed under
“radius -
Modify Radius/802.1X related parameters.” on page A-122.
+webpage - Modify web-auth page parameters.
-external - Modify web-auth External page.
-internal - Modify web-auth Internal page.
The external and internal commands share these parameters:
++failure - Users are redirected to this webpage if they fail
authentication.
++login - Users are prompted for their username and pass-
word on this webpage.
++welcome - Users are redirected to this webpage after they
authenticate successfully.
The failure/login/welcome parameters share these parame-
ters:
- -description - Text that is displayed as the main body
(normal font, middle of page) of the webpage.
- -footer - Text that is displayed at the footer (smaller font,
bottom section ) of the webpage.
- -header - Text that is displayed as a header (large font,
top section) of the webpage.
- -main-logo - Main image (large size) that will be served
up by the local webpage. Appears between the header and
description on the webpage.
- -small-logo - Small image (thumbnail size) that will be
served up by the local webpage. Appears near the footer
on the webpage.
- -Title - Text that will be the title of the webpage.
+webpage-location - The location of the web pages to be used for
authentication. These pages can either be hosted on the wireless
module or on an external web server.
-external - Use login/welcome/failure Web pages on an external
server.