WESM zl Management and Configuration Guide WT.01.03 and greater

A-125
ProCurve Wireless Services zl Module Command Line Reference
Wireless Commands
-internal - Use login/welcome/failure Web pages configured on
the wireless module.
– wep128 - Configure WEP128 parameters.
– wep64- Configure WEP64 parameters.
The wep128 and wep64 commands share these parameters:
+key - Configures pre-shared hex keys.
-<1-4> - Key index being configured.
++ascii - Keys as ascii characters (5 characters for wep64, 13
for wep128).
++hex - Keys as ascii characters (5 characters for wep64, 13
for wep128).
The hex and ascii commands share these parameters:
- -0 - Password is specified UNENCRYPTED.
+++WORD - Key (10 hex or 5 ascii characters for wep64,
26 hex or 13 ascii characters for wep128).
- -2 - Password is encrypted with password-encryption
secret.
+++WORD - Key (10 hex or 5 ascii characters for wep64,
26 hex or 13 ascii characters for wep128).
- -WORD - Key (10 hex or 5 ascii characters for wep64, 26
hex or 13 ascii characters for wep128).
+phrase - Specify a passphrase from which the keys are to be
derived.
-LINE - The passphrase between 4 and 32 characters long.
+web-default-key - Configures the transmit key index.
-<1-4>- The key index to be used for transmission from AP to
MU.
Default Setting
Disabled
Command Mode
Wireless Configuration