WESM zl Management and Configuration Guide WT.01.28 and greater

A-185
ProCurve Wireless Services zl Module Command Line Reference
Support Commands (All Contexts)
ftp://<user>:<passwd>@<hostname or IP>/path/file
scp://<user>@<hostname or IP>/path/fileDefault Setting
Default Setting
N/A
Command Mode
Manager
Example
support diag
This command configures diagnostics. The no command negates the diagnostics.
Syntax
support diag (enable | limit | period | watchdog )
• enable - Enable in-service diagnostics.
• limit - Set diagnostic period.
– buffer - Buffer usage warning limit.
+ <128> - 128k byte buffer limit.
- <0-65535> - buffer usage warning limit.
+ <16> - 16k byte buffer limit.
- <0-65535> - buffer usage warning limit.
+ <1> - 1k byte buffer limit.
- <0-65535> - buffer usage warning limit.
+ <256> - 256k byte buffer limit.
- <0-65535> - buffer usage warning limit.
+ <2> - 2k byte buffer limit.
- <0-65535> - buffer usage warning limit.
+ <32> - 32k byte buffer limit.
- <0-65535> - buffer usage warning limit.
+ <4> - 4k byte buffer limit.
- <0-65535> - buffer usage warning limit.
+ <512> - 512k byte buffer limit.
HPswitch#support copy tech-support tftp://192.168.1.10/
testfile
HPswitch#