WESM zl Management and Configuration Guide WT.01.28 and greater

2-10
Configuring the ProCurve Wireless Edge Services zl Module
Management Interfaces
Accessing the Web Browser Interface for the Wireless Services-Enabled
Switch. You can also access the module’s Web browser interface from the Web
browser interface for the wireless services-enabled switch. (Like the module’s Web
browser interface, the switch’s Web browser interface uses Java applets.) To access
the switch’s Web browser interface, enter the IP address for the management interface
as the URL in your Web browser. For example, if the management interface has the
IP address 192.168.5.1, you would enter http://192.168.5.1.
Like other modules installed in the wireless services-enabled switch, the Wireless
Edge Services zl Module is displayed on the switch graphic displayed on the Device
View screen. To access this screen, click Configuration > Device View. (See
Figure 2-1.)
Figure 2-1. The Web Browser Interface for the Wireless Services-Enabled Switch
To access the Web browser interface for the Wireless Edge Services zl Module, click
the link for the module, as shown in Figure 2-1.
Click the Link
for the Module