WESM zl Management and Configuration Guide WT.01.28 and greater

2-12
Configuring the ProCurve Wireless Edge Services zl Module
Management Interfaces
Overview of the Web Browser Interface
The Web browser interface includes a navigation bar on the left. (See Figure 2-3.)
Using this navigation bar, you can access:
■ Information screens that help you manage and troubleshoot your wireless
services
■ Configuration screens that allow you to tailor wireless services for your partic-
ular environment
Figure 2-3. Example of a Configuration Screen
Applying or Saving Changes
When you use the Web browser interface to configure the Wireless Edge Services zl
Module, these changes may affect two configuration files, depending on whether you
apply or save changes:
■ startup-config—When you save changes, these changes become part of the
startup-config file, which is stored in non-volatile RAM (NVRAM) on the
module’s internal flash. When the Wireless Edge Services zl Module is rebooted,
all of the configurations that are contained in the startup-config file are retained.
During the reboot process, the module initializes the designated boot image
software and then loads the startup-config.
Navigation bar