WESM zl Management and Configuration Guide WT.01.28 and greater

2-18
Configuring the ProCurve Wireless Edge Services zl Module
Management Interfaces
When you select two criteria, you must use Boolean operators to link the two:
■ AND—Only rows that match both criteria display.
■ OR—Rows that match either or both criteria display.
In the fields to the right of the drop-down menus (see Figure 2-7 on page 2-17), you
create the actual filter. The format for the filter depends on the type of column:
■ Match operators—for columns that include a string.
In the field on the right, you enter the string that must be included in the specified
column. For example, if Encryption was selected from the drop-down menu on
the left, you could enter TKIP. The string match is case sensitive.
You also select, from a drop-down menu in the middle, the degree to which the
string in a column must match the string in the filter. You can choose:
• contain—The column must contain the specified string, but can also include
other characters.
• exactly match—The column must include only the specified string.
• start with—The string in the column must start with the specified string,
but can include characters after the string.
• end with—The string in the column must end with the specified string, but
can include characters before the string.
■ True or false—for columns that have either a green check mark or red X. You
choose whether the filter selects items for which the criteria is True (the column
has a green check mark) or False (the column has a red X).
■ From and to fields—for columns that list numbers, such as index numbers. The
range is inclusive—that is, the filter matches the number in the From field, the
number in the to field, or any number between the two.
To use the filtering options on a screen that can be filtered, complete the following
steps:
1. On the screen, click Show Filtering Options.
A Filter Options section is displayed on the screen, similar to the example shown
in Figure 2-8.