WESM zl Management and Configuration Guide WT.01.28 and greater

2-27
Configuring the ProCurve Wireless Edge Services zl Module
Management Interfaces
Controlling Management Access to the Module
This section teaches you how to control Web management access to the Wireless
Edge Services zl Module. It explains how to:
■ enable and disable HTTP and HTTPS access
■ configure the internal FTP server
■ choose SNMP versions
■ change passwords for the default SNMP v3 users (manager and operator)
■ create new Web-Users—users allowed to access the module’s Web browser
interface with various privileges
Enabling HTTP and HTTPS Access to the Module
As described in “Security” on page 2-24, the Wireless Edge Services zl Module
includes an HTTP server and an HTTPS server, which run the module’s Web browser
interface. (Access to the interface is controlled by SNMP v3.)
■ By default, both servers are enabled. You can disable either or both of these
servers. (Of course, if you disable both, you will only be able to configure the
module through the CLI.)
Follow these steps to enable and disable HTTP and HTTPS:
1. Select Management > Web Access Control.