WESM zl Management and Configuration Guide WT.01.28 and greater

2-32
Configuring the ProCurve Wireless Edge Services zl Module
Management Interfaces
Setting Up the Internal FTP Server
The Wireless Edge Services zl Module includes an FTP server, which can send files
stored in the module’s flash memory to FTP clients. For example, you could upload
a configuration file directly from one module to another—eliminating the middle
step of transferring the file to an external FTP server.
The FTP server has these properties:
■ Port—The server listens on the standard FTP port, 21. You cannot alter the port
number.
■ Username—The default username is “ftpuser” and cannot be altered.
■ Password—The FTP client must submit the correct password to receive the
requested file.
■ Root directory—The Wireless Edge Services zl Module searches this directory
for requested files. You can specify the module’s entire flash memory or a
directory within the flash.
By default, the FTP server is disabled.
Follow these steps to set up the internal server:
1. Select Management > Web Access Control.
2. Check the Enable FTP box.