WESM zl Management and Configuration Guide WT.01.28 and greater

2-47
Configuring the ProCurve Wireless Edge Services zl Module
Management Interfaces
3. Choose the primary authentication method from the Preferred method drop-
down menu.
You can choose local (which is the list of local users configured on the Local
Users tab) or radius.
4. If you want to use both authentication methods, chose the other method from the
Alternate method drop-down menu.
If the preferred method fails, the alternate is attempted. Note that “fails” means
that the authentication service is unavailable, not that the user’s authentication
attempt fails.
5. Optionally, check the If authentication services are unavailable, allow read-
only access box.
All users are granted read-only (monitor) access when the selected authentication
services are unavailable.
If you do not check the box and authentication services become unavailable, users
will have not access to the Web browser interface at all. (They must access the
module CLI from the wireless services-enabled switch CLI.)
6. Click the Apply button.
7. If you have selected RADIUS for either authentication method, you must specify
the RADIUS server:
a. Click the Add button. The Add RADIUS Server screen is displayed.
Note The Wireless Edge Services zl Module attempts to contact RADIUS servers in the
order that you add them. Be careful to specify your preferred server first.