WESM zl Management and Configuration Guide WT.01.28 and greater

2-60
Configuring the ProCurve Wireless Edge Services zl Module
Radio Port Adoption
Figure 2-32. Radio Port VLAN for an Indirectly Connected RP
Instead of using the default Radio Port VLAN, you can use any VLAN in your
network—even a VLAN that is used to transmit wired traffic. In this case, you must
manually tag the downlink port for this VLAN and configure other switch ports for
this VLAN as described above. In Figure 2-33, for example, the network adminis-
trator used VLAN 300 for traffic transmitted to and from one of the RPs.