WESM zl Management and Configuration Guide WT.01.28 and greater

2-61
Configuring the ProCurve Wireless Edge Services zl Module
Radio Port Adoption
Note Generally, you should simply assign RPs to the default Radio Port VLAN ID (2100).
Assigning RPs to a VLAN also used in your Ethernet network can introduce problems
because you must never tag both the uplink and the downlink port for the same VLAN.
Such a configuration would cause the Wireless Edge Services zl Module to ignore
the downlink port.
Figure 2-33. Manually Creating Radio Port VLANs
For more information about Radio Port VLANs, see Chapter 1: “Introduction.”