WESM zl Management and Configuration Guide WT.01.28 and greater

2-80
Configuring the ProCurve Wireless Edge Services zl Module
Radio Port Adoption
Figure 2-46. Configure Port Authentication Screen
4. Configure a username and password.
• Check the Use Default Values box to use the default username and password:
– username: admin
– password: procurve
• Or, in the Username and Password fields, enter the username and password
that you want to use.
5. Click the OK button, and then click the OK button on the Global screen.
Note The Wireless Edge Services zl Module pushes the username and password to the
RPs as a one time occurrence. You must complete these steps again to configure
the username and password on an RP that is adopted later.
6. Click the Save link at the top of the Web browser interface to save the changes
to the startup-config.