WESM zl Management and Configuration Guide WT.01.28 and greater

2-85
Configuring the ProCurve Wireless Edge Services zl Module
System Maintenance
4. Click the Save link at the top of the Web browser interface to save the changes
to the startup-config.
Manually Updating the Software Image
ProCurve Networking periodically updates the software image for the Wireless Edge
Services zl Module. You can configure the module to automatically contact an Update
Server and download the new image when the module is rebooted, or you can
manually update the image. (To configure settings for automatic updates, see “Update
Server” on page 2-98.)
To manually update an image, complete these steps:
1. Select Management > System Maint.—Software.
2. Click the Upgrade Software button at the bottom of the screen. The Update
screen is displayed.
The software image that you upload will automatically copy to the image not
currently in use.
Figure 2-51. Upgrade Software Image Screen
3. In the From field, accept the default setting, Server.
4. In the File field, enter the name of the new image file.
5. In the Using field, use the drop-down menu to select FTP or TFTP, depending on
the type of server that you have.