WESM zl Management and Configuration Guide WT.01.28 and greater

2-89
Configuring the ProCurve Wireless Edge Services zl Module
System Maintenance
Transferring, or Copying, Files
The Web browser interface allows you to transfer, or copy, configuration files. You
simply specify a source and a destination for the transfer. Valid selections are listed
in Table 2-4:
Table 2-4. Transferring Files to and from the Wireless Edge Services zl Module
When you select a source, the Web browser interface displays the fields that are
needed to copy a configuration file from that source. Likewise, when you select a
destination, the Web browser interface displays the fields that are needed to copy a
file to that destination. For example, to copy a file from a TFTP server, you must
specify fields such as the IP address and the name of the file.
Transferring Configuration Files from an FTP or TFTP Server to
the Wireless Edge Services zl Module
To upload a configuration file from an FTP or TFTP server to the Wireless Edge
Services zl Module, complete these steps:
1. Select Management > System Maint.—Config Files.
2. Click the Transfer Files button at the bottom of the screen. The Transfer screen
is displayed. (See Figure 2-54.)
From (Source) To (Destination)
Server—either an FTP or TFTP server Wireless Edge Services zl Module
Wireless Edge Services zl Module • Wireless Edge Services zl Module
• Local disk
• Server—either an FTP or TFTP server