WESM zl Management and Configuration Guide WT.01.28 and greater

2-91
Configuring the ProCurve Wireless Edge Services zl Module
System Maintenance
The Web browser interface is restricted and does not support copying directly to the
running configuration.To immediately write to the running configuration, use the
CLI.
5. Click the Transfer button. In the Status section at the bottom of the screen, a
message is displayed, reporting whether the transfer was successful.
Transferring Configuration Files from the Wireless Edge Services
zl Module to Another Destination
You can copy a configuration file from the Wireless Edge Services zl Module to the
module itself, an FTP server, a TFTP server, or the hard disk of your workstation.
Complete these steps:
1. Select Management > System Maint.—Config Files.
2. In the Source section, specify the source as the Wireless Edge Services zl
Module:
a. In the Source section, in the From field, use the drop-down menu to select
Wireless Services Module.
Figure 2-55. Management > System Maint.—Config Files > Transfer Screen
b. In the File field, use the drop-down menu to select the file that you want to
copy.